lunes, 29 de noviembre de 2010

Revolutionary Method Of Creating Conductive Transparent Thin Films Discovered by Mistake

A novel method for developing conductive and transparent thin films, that could be used in applications ranging from solar cells to ultracapacitors, has been discovered by a team of UCLA researchers, by mistake.

Mientras que Julio M. D'Arcy, estudiante de postgrado de alto nivel en Richard B. Kaner 's laboratorio de la UCLA, fue purificar algunos nanofibras con cloroformo en un recipiente de agua, observó una delgada película de polímero de difusión por las paredes del recipiente. While Julio M. D'Arcy, senior graduate student in Richard B. Kaner's UCLA lab, was purifying some nanofibers with chloroform in a water container, he observed a thin film of polymer spreading up the walls of the container.


Conducting plastics such as the one discovered by D'Arcy have been touted for a long time, but their wide use had been halted by the difficulties they posed in the process of layering them into films. "La realización de polímeros tienen un enorme potencial en la electrónica, y debido a esta técnica funciona con muchos sustratos es así, puede ser utilizado en un amplio espectro de aplicaciones, incluyendo las células solares orgánicas, diodos emisores de luz, vidrios inteligentes y sensores", dijo Yang Yang, un profesor de ciencias de los materiales e ingeniería en la Escuela Samueli de Ingeniería y Ciencia Aplicada y director de la facultad de la Nano Centro de Energías Renovables en el CNSI. "Conducting polymers have enormous potential in electronics, and because this technique works with so many substrates, it can be used in a broad spectrum of applications, including organic solar cells , light-emitting diodes, smart glass and sensors," said Yang Yang, a professor of materials science and engineering at the Samueli School of Engineering and Applied Science and faculty director of the Nano Renewable Energy Center at the CNSI.

Un Physorg artículo menciona cómo el proceso de creación de trabajo: A Physorg article mentions how the process of creation worked:

"When water and oil are mixed, a blend of droplets is formed, creating a water–oil interface that serves as an entry point for trapping polymer nanofibers at liquid–liquid interfaces. Como las gotas se unen, un cambio en la concentración de sólidos mezclados en la interfase agua-aceite conduce a una diferencia de tensión superficial. As droplets unite, a change in the concentration of blended solids at the water–oil interface leads to a difference in surface tension. Difundir una pared de cristal se produce como resultado de un intento de reducir la diferencia de tensión superficial. Spreading up a glass wall occurs as result of an attempt to reduce the surface-tension difference. el flujo de fluido de dirección conduce a una fina película continua conductor compuesto de una sola capa única de nanofibras de polímero. Directional fluid flow leads to a continuously conductive thin film comprised of a single monolayer of polymer nanofibers. La uniformidad de la superficie de la película se debe a las partículas que son sacados de la interfase agua-aceite, intercalado entre dos fluidos de oponerse a las tensiones de superficie. The uniformity of the film surface is due to the particles being drawn out of the water–oil interface, sandwiched between two fluids of opposing surface tensions".

In the solar cell industry, for example, conductive transparent thin films could be used in making materials with adjustable tint and in organic solar cells . El equipo quiere aumentar el número de solicitudes de la película podría haber también por el estudio de otros nanomateriales (de nanofibras de carbono) con la técnica. The team wants to increase the number of applications the film could have by also studying other nanomaterials (than carbon nanofibers) with the technique.

1 comentario: